IAI America IX-NSN6016H - Manual (Page 113)

105
1
1. Precautions for Use
x Be sure to use clean, dry air with an atmospheric dew point of -20qC or less. If dry air is not used,
condensation may occur inside the robot, resulting in earth leakage or malfunction.
x Do not apply pressure exceeding the specified maximum pressure of 0.6 MPa. Doing so may cause the
seals to break and impair the robot’s dust-proof/drip-proof performance.
x Adjust the pressure and also adjust the flow rate using the speed controller at the back of the base to
prevent intrusion of powder dust.
Caution