CTI Products MCN Server 8000 - Manual (Page 78)

MCNConfig Program: Network Interface Window
78 68-12286-110
Adding a GCM 8000 Comparator
When you have selected a GCM 8000 comparator by one of the above methods, the GCM 8000
configuration window is opened.
This configuration is the Network Interface portion of the GCM 8000 comparator.
•
The program will automatically assign a sequential name starting with the prefix NI (Network
Interface). You can change it to whatever you want.
•
The program will pick an IP address in the 192.168.x.x. range.
Edit the IP Address for the proper address of the GCM 8000 comparator.
Adding an MLC 8000 Analog Comparator
When you have selected an MLC 8000 Analog Comparator by one of the above methods, the MLC 8000
configuration window is opened.
This configuration is the Network Interface and Voter ID portion of the MLC 8000 Analog Comparator.
•
The program will automatically assign a sequential name starting with the prefix NI (Network
Interface). You can change it to whatever you want.
•
The program will pick an IP address in the 192.168.x.x. range.
Edit the IP Address for the proper address of the MLC 8000 Analog Comparator.
•
Add the proper MLC Voter ID. The Voter ID can be found in the MMC_config.csv file and the
MLC 8000 Analog Comparator CT software. See the MLC 8000 Analog Comparator
Interfacing section starting on page 44 for details.