CTI Products MCN Server 8000 - Manual (Page 215)

Appendix D: Fixing PCLTA Installation Problems
215 68-12286-110
Appendix D: Fixing PCLTA Installation Problems
The PCLTA drivers must be loaded prior to installing the PCLTA card. If the PCLTA card was installed
first, and an attempt was made by the Windows operating system to load the drivers, follow these steps
to re-install the drivers correctly:
Navigate to the Control Panel from the Start Menu, then double-click the “System” icon to display the
“System Properties” window as shown below. (If the “System” icon is not visible, change the Control
Panel properties to “Classic View”.)
On the “Hardware” tab, click on the Device Manager button to display the “Device Manager”
window. If the driver for PCLTA network interface is not installed correctly, “Other Devices” will be
listed (instead of “LonWorks Network Interface”). Expand the “Other Devices” icon so that “Network
Controller” is listed as shown below.
Select “Network Controller” with an “X” through its icon, then from the Action Menu, select “Disable”.
Follow any additional prompts, and restart the PC.
The PCLTA driver can now be reinstalled from the distribution CD (S2-61502).