CTI Products MCN Server 8000 - Manual (Page 134)

MCN Server 8000 Program
134 68-12286-110
Printer Setup
For alerts to be printed, printer parameters must be provided in the following screen. To display this
window, choose “Printer Setup” from the Options Menu.
Parameters in the above window can be obtained from the specific printer documentation.
Printer Initialization String This Escape character sequence is sent to the printer at the
start of a new print job. In the example above, ^O instructs
the printer to print without using a bottom margin, since
continuous paper will be used. ^M selects 10.5 points for
the font height and 12 characters per inch horizontally. And
^J specifies the line feed distance.
End of Line This Escape character sequence is sent to the printer after
each line of print. Normally, this should consist of escape
characters for “line feed” and “carriage return”.
Lines per Page Enter the number of lines to be printed on each page.
Form Feed/Page Eject This Escape character sequence is sent to the printer after
the number specified in “Lines per Page” above have been
printed on a page.
Printer Name A drop-down list is provided to select from the installed
printers on this PC.
Font
The Font Selection window is used to select a font and a font size for the Receivers and Function Blocks
in the Display Window.
The row sizes will automatically stretch or shrink in response to font size changes. You may have to
change the column widths manually after you make a change.