CTI Products MCN Server 8000 - Manual (Page 228)

Glossary
228 68-12286-110
Port (GCM) Receiver Port Number (1-64) in a GCM-8000 comparator
Port (IP) A number indicating a logical connection within an IP device. Ports allow multiple
types of messages (email, HTTP, FTP, etc.) to be sent to the same IP address. The
IP device routes each incoming message based upon its destination port.
Radio ID Unique ID number in a MLC 8000 Analog Comparator and MMC comparator to
identify the Receiver in a particular channel. Each MLC 8000 Subsite Link
Converter (AGU) will have 4 Radio IDs in it. This ID is needed when configuring
the receivers for the MLC 8000 Analog Comparator or the MMC in MCN Config
Server. The Radio ID is entered in the MLC ID field in the Receiver Window.
RCD Remote Comparator Display
RNI Radio Network Infrastructure – the Motorola Solutions Inc (MSI) network that
includes the radio and console equipment. This is separated from the Customer
Enterprise Network (CEN) by routers and/or firewalls.
Subnet Mask The bits that define the Subnet range. A portion of the IP Address Bits (normally
the upper bits) are used to define the subnet range. The subnet mask identifies the
“NetID” and “HostID” portions of the IP address in a bitwise fashion. The mask is
constructed by placing a “1” in any bit that is part of a subnet (NetID) address. So
subnet mask bits that are SET define the NetID, and CLEARED subnet mask bits
define the HostID.
A subnet mask of 255.255.255.0 defines the NetID as the first three octets, and the
HostID as the last octet. For example, for the address 192.47.73.111 and the subnet
mask of 255.255.255.0, the subnet can be identified as 192.47.73.0.
UDP User Datagram Protocol a simple transport protocol used on the Internet.
VGU MLC 8000 Analog Comparator
Includes port for connection to the console
Voter ID Unique ID number in a MLC 8000 Analog Comparator and MMC comparator to
identify the Voter portion of the system for a particular channel. This ID is needed
when configuring the MLC 8000 Analog Comparator or the MMC in MCN Config
Server.