CTI Products MCN Server 8000 - Manual (Page 12)

Introduction
12 68-12286-110
MCN Server 8000 IP System Example
A typical MCN Server 8000 PC is shown in the figure below attached Motorola IP Comparators.
The MCN Server 8000 Remote Comparator Display system consists of:
An PC running the MCN Server 8000™ program
One or more Motorola Solutions IP Comparators
(GCM 8000 or MLC 8000)
Client PCs connected to the PC over an IP LAN or WAN.
MCN SERVER PC
MLC 8000 VGU
GCM 8000
GCM 8000
IP Switch Router
Remote Site 1
GCM 8000
GCM 8000
IP Switch Router
Remote Site N
DISPATCH 1
DISPATCH 2
WAN
MCN CLIENT PCs
CA-80927-101
Router IP Switch
MLC 8000 VGU
MCN CLIENT PCs
Router IP Switch
VGU
VGU
MLC 8000
MLC 8000
Figure 1 – MCN Server 8000 System with IP Comparators
•
The diagram includes only the IP comparators and not legacy equipment.
•
The diagram does not show the BRs (Base Radios) or the
MLC 8000 Subsite Link Converter (AGU) units.
•
Other IP routes and switches may be involved.
•
The GCM 8000 and MLC 8000 Analog Comparators can be operating in a stand-alone mode (4
digital and 4 analog channels) or they could be operating as a Mixed Mode Voting Solution (4
Mixed Mode channels) or a combination of stand-alone and Mixed-Mode channels.
•
The MCN Server 8000 PC is a stand-alone PC. It does not need Windows Server software.
•
Client PCs may be stand-alone PCs or may be MCC 7500 Dispatch PCs running the MCN
Client software.