CTI Products MCN Server 8000 - Manual (Page 36)

Installation
36 68-12286-110
Changing the PCLTA Group/Module Address
If the Group/Module address for the PCLTA Network Interface needs to be changed (or to query the
PCLTA for its current address), simply run the hwsetup.exe program. This program can be found in the
main program directory (typically c:\Program Files\CTI Products Inc\McnRcd Server 8000). Then click
the Next button until the following window is displayed.
The Group/Module address defaults to “F0/00” during installation. However, each PC must have a
unique address.
In the above window, click the Next button, then the Finish button to complete the address change for
the PCLTA Network Interface.
PC Power Options Setup
The “Power Options” icon in the Control Panel allows for a wide variety of PC operation parameters.
However, installation of MCN Server software will disable any possibility of the PC going into the
Standby or Hibernate Mode.
The monitor may be allowed to “sleep” as long as the “Monitor Timeout” is less than the “Standby
Time”. Otherwise, the monitor will never sleep.
Printer Installation
For printer logging to occur, a printer must be installed from the Windows operating system. From the
Start menu button on the windows desktop, select “Printers and Faxes” from the list, then select “Add a
Printer” from the list of “Printer Tasks”.
Uninstalling MCN Server Software
To uninstall MCN Server software, insert the MCN Server distribution CD into the CDROM drive.
Click the Start menu button on the Windows desktop, then select “Run …” from the list. In the “Run”
dialog box, type d:setup.exe (where d is the drive letter of the CDROM drive), then click the OK button.
In the “InstallShield Wizard” window, select “Remove”, then click the Next button. Follow the prompts
until the InstallShield Wizard completes the removal.