CTI Products MCN Server 8000 - Manual (Page 16)

Introduction
16 68-12286-110
MCN Server 8000 Part Numbers
The following part numbers are for the MCN Server 8000 software and options.
Legacy MCN equipment part numbers appear in the Appendix F: Legacy Equipment Part Numbers
section on page 224.
Motorola
Part
Number
CTI Products
Part Number Description
DDN1289 S1-61594 MCN SERVER 8000 SW LIC FOR 4 MOTOROLA IP COMPARTORS & 4 CLIENTS
DDN1287 S1-61595 MCN SERVER 8000 SW LIC OPT FOR 1 ADD'L MOTOROLA GCM 8000 OR MLC 8000
DDN1288 S1-61596 MCN SERVER 8000 SW LIC OPT FOR 4 ADD'L MOTOROLA GCM 8000 OR MLC 8000
DDN1295 S1-61129 MCN SW LIC OPT CLIENT EXPANSION FOR 4 ADD'L CLIENTS
DQS261151 S2-61151 MCN HIB-IP 8000 UNIT FOR LEGACY MCN NETWORKS
DDN1294 S2-61164
MCN SW LIC OPTION MULTI-NI-4. ADDS SUPPORT FOR (4) HIB-IP
(or HIB-IP 8000) Units
DDN1290 S2-61600 MCN SERVER 8000 MANUAL
Hardware and Software Environments
MCN Server 8000 and Client software requires a PC with the following minimum system configuration:
Windows XP, Vista, or 7 or Windows Server 2003, 2005, 2008R2
The MCN Server software does not need to be run on a Windows Server operating system.
Intel 64-Bit processor 2.0 GHz (Xeon Dual-Core W3503 recommended)
2 GB Memory
CD-ROM Drive
Open USB 2.0 Port
100Base-T Ethernet port
One open serial port if the local network interface is a HIB-232
One open PCI slot if a legacy MCN PCLTA Network Interface card is used
(only for 32-bit operating systems)
Color Monitor
Supported Operating Systems
In a stand-alone system, the MCN Server software and the Client software can run on:
•
Windows XP
•
Windows Vista
•
Windows 7
•
Windows Server 2003
•
Windows Server 2005
•
Windows Server 2008r2