CTI Products MCN Server 8000 - Manual (Page 14)

Introduction
14 68-12286-110
Package Contents
The MCN Server 8000 package will include the following:
Software CD
The MCN Server 8000 software package includes:
Installation Program
This is a standard Installshield program used to install the software on the PCs.
The CD has both the MCN Server 8000 and the MCN Client software on it.
HWSetup Program
This is used to select which network Interfaces to use for legacy support.
It is also used to enter the Software Key for the system.
MCNConfig Program (McnConfig Server 8000.exe)
This is the configuration program that is used by an engineer or technician to build the
configuration files when the system is installed or changed.
MCN Server 8000 Program
This is the program that operates on the MCN Server PC. It has a local display that displays the
status of the devices on the MCN system (Comparators, I/O points, alarms, etc.). It allows the
operator to control receivers (with Force-Vote and Disable functions) and other I/O devices
(relays, etc.) from the MCN Server PC.
The MCN Server program also passes the status and control data to MCN Client PCs over an IP
LAN or WAN.
MCN Client Program (ClientRCD.exe)
This is the Client program that operates on remote PCs to control and display the status of the
MCN system. The MCN Client program operates on PCs connected to the MCN Server via an IP
network, and thus do not need their own MCN Network Interface.
Manuals in PDF format
Hardware Key
A serialized USB Key is included.
Software Key CD
This CD will have the Software Key for the system. The Software Key matches the serial number of
the Hardware Key. It will contain the capabilities licensed for the software (number of IP
comparators, number of clients, etc.)
Software Manual
This manual.
No PCs Included
The MCN Server 8000 software package does not include Server or Client PCs.