CTI Products MCN Server 8000 - Manual (Page 129)

MCN Server 8000 Program
129 68-12286-110
Setting IP Parameters
The program will open the IP Configuration window.
Use the default settings for the last three fields.
Enter the proper parameters.
This window has the following fields:
Server IP Address to HIB-IP units
This is the IP address of the NIC (in the PC) that you want to use to talk to the HIB-IP units.
Server IP Address to Client PCs
This is the IP address of the NIC (in the PC) that you want to use to talk to the MCN Client
PCs.
Server Port
This is the Port number in the MCN Server PC to which the MCN Clients connects.
Use the default value for ASTRO® 25 7.12 (and up) systems.
Multicast IP to Client PCs
This is the Multicast IP address that the MCN Server PC uses to send the real-time status data
to the Clients. Use the default value for ASTRO® 25 7.12 systems for:
Server 1, Zone 1, Main Prime site.
If your system configuration is different, please refer to the Motorola IP Plan document for the
proper Multicast IP address. .
Multicast Port
This is the destination UDP Port number for the real-time Multicast traffic from the MCN
Server PC to the Clients. Use the default value for ASTRO® 25 7.12 systems.
You must re-start the MCN Server program after you change IP parameters.
If you need to change these
IP settings later, use the
Options / IP Settings
menu item to open this
window.
XXXXX
XXXXX
XXX . XXX . XXX . XXX