CTI Products MCN Server 8000 - Manual (Page 52)

Interfacing to IP Comparators MLC 8000 Comparator
52 68-12286-110
MLC 8000 Analog Comparator Limitations
The MLC 8000 Analog Comparator has the following limitations
Maximum of 15 Simultaneous MCN Servers or CSS Sessions
The MLC 8000 Analog Comparator supports 15 simultaneous connections for real-time sessions. These
sessions include:
•
CTI MCN Server 8000 Software
•
MLC 8000 CT / DA Software
From a practical standpoint, this should not pose a problem since systems will normally not have more
than 1 or 2 MCN Server PCs.
MCN Server & CT / DA software cannot run simultaneously on the same PC
The MLC 8000 Analog Comparator cannot talk to both the MCN Server software and the MLC 8000 CT
/ DA software running on the same PC simultaneously.
•
If you have to run CT software on the Server PC, you will have to exit the MCN Server
software.
•
If you have the CT software running on the Server PC and try to start the MCN Server software,
it will not communicate to the MLC 8000 Analog Comparator. You will have to close the CT
software first.