Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 90)

Chapter
3
Chapter 3 I/O Modules 3-63
3.17 ADAM-4056SO 12-channel Source Type Isolated Digital Output
Module
ADAM-4056SO is a 12-channel source type isolated digital output
module. The 12 isolated digital output channels are designed for
critical applications. The digital output signals are sent in the range of
10 ~ 35 V
DC
with maximum 1A per channel, and both ADAM ASCII
and Modbus/RTU protocols are supported. The LED indicators
provide status reading of the module.
Figure 3-59 ADAM-4056SO 12-channel Source Type Isolated
Digital Output Module
Technical Specification of ADAM-4056SO
ΠNumber of Output Channel: 12
ΠDigital Output: VCC: +10 ~ 35V
DC
, 1A per Channel ( Source)
ΠLED Indicator: On: Active, Off: Non-active
ΠPower Consumption: 1 W @ 24V
DC
ΠOptical isolation: 5000 V
DC
ΠSupports Modbus/RTU protocol
ΠI/O Connector Type: 10 pin plug-in terminal*2
Œ Leakage current : 50μA
ΠSupport Safety Value:
Force the DO channels to safety status when communication is in
time-out and over pre-defined period.