Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 295)

Digital I/O and Relay Output
Counter/Frequency Command Set
7-60 ADAM 4000 Series User’s Manual
7.2.4 Digital Output and Alarm Command Set
Command Syntax Command Name Description I/O Module
@AAPN(data) Set Initial Count Value
of Counter N Sets the inital count value of
the module for counter 0 or
counter 1 4080
@AAGN Read Initial Count
Value of Counter N Read the initial count value of
counter 0 or counter 1 4080
@AAEAN Enable Alarm of
Counter N
Enable alarm for the specified
counter 0 or counter 1 4080
@AADAN Disable Alarm of
Counter N
Disable alarm for the specified
counter 0 or counter 1 4080
@AAPA(data) Set Alarm Limit Value
of Counter 0
Download the alarm limit value
for counter 0 of the specified
module 4080
@AASA(data) Set Alarm Limit Value
of Counter 1
Download the alarm limit value
for counter 1 of the specified
module 4080
@AARP Read Alarm Limit
Value of Counter 0
Ask the module to return the
alarm limit value of counter 0 4080
@AARA Read Alarm Limit
Value of Counter 1
Ask the module to return the
alarm limit value of counter 1 4080
@AADO(data) Set Digital Output
Values
Set the values of the module's
two digital outputs (ON or OFF) 4080,
4080D
@AADI Read Digital Output
and Alarm Status
Ask the addressed module to
return the state of its two digital
output channels and the status
of its alarm 4080,
4080D
(Continued on next page)