Advantech Data Acquisition Modules ADAM 4000 User Manual

Page 206

5-60

ADAM 4000 Series User’s Manual

4011, 4011D, 4012

@AACE

Name

Clear Event Counter command

Description

The addressed module is instructed to reset its event
counter to zero.

Syntax

@AACE(cr)

is a delimiter character.

(range 00-FF) represents the 2-character hexadecimal

address of an analog input module.

is the Clear Event Counter command.

(cr)

represents terminating character, carriage return (0Dh).

Response

!AA(cr)

if the command was valid.

There is no response if the module detects a syntax error or
communication error or if the specified address does not
exist.

delimiter character indicates a valid command was

received.

represents the 2-character hexadecimal address of the

responding analog input module.

(cr)

represents terminating character,

carriage return (0Dh).

Example

command: @09CE(cr)
response: !09(cr)

The command instructs the module at address 09h to set its
event counter to zero. The module responds that its counter
has been reset.