Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 113)

Command Set
4-10 ADAM 4000 Series User’s Manual
ADAM-4013 Command Table
Command Syntax Command Name Command Description Page No.
%AANNTTCCFF Configuration Sets the address, baud rate, data
format, checksum status, and/or
integration time for a specified
analog input module 5-4
#AA Analog Data In Returns the input value from a
specified analog input module in
the currently configured data
format 5-14
$AA0 Span Calibration Calibrates an analog input moudle
to correct for gain errors
5-19
$AA1 Offset Calibration Calibrates an analog input moudle
to correct for offset errors 5-20
#** Synchronized
Sampling
Orders all analog input modules to
sample their input values and store
them in special registers 5-21
$AA4 Read Synchronized
Data
Returns the value that was stored
in the specified module's register
after the #** command 5-22
$AA2 Configuration Status Returns the configuration
parameters for the specified
analog input module 5-10
$AAF Read Firware
Version
Returns the firmware version code
from the specified analog input
module 5-12
$AAM Read Module Name Returns the module name from the
specified analog input module 5-13