Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 126)

Chapter
4
Chapter 4 Command Set 4-23
ADAM-4019+ Command Table (Continued)
Command Syntax Command Name Command Description Page No.
$AA0Ci Single Channel
Span Calibration
Gain error calibrate of assignment
channel, User have to input the
external standard source for
calibrating process 5-27
$AA1Ci Single Channel
Offset Calibration
Offset error calibrate of assignment
channel, User have to input the
external standard source for
calibrating process 5-28
$AA7CiRrr Input Range
Setting Input range setting individually 5-29
$AA8Ci Read Input Range Get the input range of the assignment
channel 5-30
$AAXnnnn Set Communication
WDT Set communication WDT cycle time
from 0000 ~ 9999 (unit: 0.1 second. if
value is 0000, the communication WDT
function will be disable) 5-31
$AAY Get Communication
WDT setting
Read the cycle time setting of
communication WDT 5-32