Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 122)

Chapter
4
Chapter 4 Command Set 4-19
ADAM-4018+ Command Table (Continued)
Command Syntax Command Name Command Description Page No.
$AA1Ci Offset Calibration Offset error calibrate of assignment
channel, User have to input the external
standard source for calibrating process 5-28
$AA7CiRrr Input Range Setting Input range setting individually 5-29
$AA8Ci Read Input Range Get the input range of the assignment
channel 5-30
$AAXnnnn Set Communication
WDT
Set communication WDT cycle time from
0000 ~ 9999 (unit: 0.1 second. if value is
0000, the communication WDT function
will be disable) 5-31
$AAY Get Communication
WDT Setting
Read the cycle time setting of
communication WDT 5-32
ADAM-4018+
Input range and external calibrating input source for each input type
Range
bcode(Hex)
Input Range Max. Signal Min Signal Displayed
Resolution
06 +/-20 mA +20.000 -20.000 1uA
07 4~20 mA +20.000 +4.000 1uA
14 Type J
Thermocouple
15 Type K
Thermocouple
16 Type T
Thermocouple
17 Type E
Thermocouple
18 Type R
Thermocouple
19 Type S
Thermocouple
20 Type B
Thermocouple