Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 120)

Chapter
4
Chapter 4 Command Set 4-17
ADAM-4018 Command Table
Command Syntax Command Name Command Description Page No.
%AANNTTCCFF Configuration Set the address, input range, baud
rate, data format, checksum status
and/or integration time for the
specified analog input module 5-4
$AA2 Configuration Status Return the configuration
parameters for the specified analog
input module 5-10
$AAF Read Version Return the firmware version code
from the specified analog input
module 5-12
$AAM Read Module Name Return the module name from the
specified analog input module 5-13
#AA Read Analog Input
from all Channels
Return the input value from all
channels of the specified analog
module 5-14
#AAN Read Analog Input
from Channel N
Return the input value from
channels number N of the
specified analog input module 5-16
$AA5VV Enable/disable
Channels for
Multiplexing
Enables/disables multiplexing
simultaneously for seperate
channels of the specified input
module 5-17
$AA6 Read Channel
Status
Ask the specified input module to
return the status of all eight
channels 5-18
$AA0 Span Calibration Calibrate the analog input module
to correct for gain errors 5-19
$AA1 Offset Calibration Calibrate the analog input module
to correct for offset errors 5-20
$AA3 CJC Status Returns the value of the CJC
sensor for a specified analog input
module 5-25
$AA9SNNNN CJC Offset
Calibration
Calibrates the CJC sensor for
offset errors 5-26