Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 108)

Chapter
4
Chapter 4 Command Set 4-5
ADAM-4011 Command Table (Continued)
Command Syntax Command Name Command Description Page No.
@AADI Read Digital I/O and
Alarm Status The addressed module returns the
state of its digital input channel, its
two digital output channels and the
status of its alarm 5-50
@AADO(data) Set Digital Output Set the values of the module's two
digital outputs (ON or OFF) 5-52
@AAEAT Enable Alarm Enables the alarm in either
Momentary or Latching mode 5-54
@AAHI(data) Set High Alarm Downloads the High alarm limit
value 5-56
@AALO(data) Set Low Alarm Downloads the Low alarm limit
value 5-57
@AADA Disable Alarm Disables all alarm functions 5-58
@AACA Clear Latch Alarm The latch alarm is reset 5-59
@AARH Read High Alarm The addressed analog input
module is asked to return its high
alarm value 5-60
@AARL Read Low Alarm The addressed analog input
module is asked to return its low
alarm value 5-61
@AARE Read Event Counter The addressed module is asked to
return its event counter value 5-62
@AACE Clear Event Counter The event counter is set to 0 5-63