Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 141)

Command Set
4-38 ADAM 4000 Series User’s Manual
ADAM-4080 Command Table (Continued)
Command Syntax Command Name Command Description Page
No.
$AA4S Enable/Disable
Digital Filter
Enables or disables the digital
filter of the addressed
counter/frequency module 7-49
$AA4 Read Filter Status The addressed counter frequency
module returns the status of its
digital filter 7-50
$AA0H(data) Set Minimum Input
Signal Width at High
Level Sets the minimum input signal
width at high level for a specified
counter/frequency module 7-51
$AA0H Read Minimum Input
Signal Width at High
Level
Reads the minimum input signal
width setting at high level for a
specified counter/frequency
module 7-52
$AA0L(data) Set Minimum Input
Signal Width at Low
Level Sets the minimum input signal
width at low level for a specified
counter/frequency module 7-53
$AA0L Read Minimum Input
Signal Width at Low
Level
Reads minimum input signal
width setting at low level for a
specified counter/frequency
module 7-54
$AA1H(data) Set Non-isolated
High Trigger Level
Sets the high trigger level of
non-isolated input signals for a
specified counter/frequency
module 7-55
$AA1H Read Non-isolated
High Trigger Level
Requests the addressed counter
frequency module to return the
high trigger level for non- 7-56
$AA1L(data) Set Non-isolated Low
Trigger Level isolated input signals 7-57
$AA1L Read Non-isolated
Low Trigger Level Sets the low trigger level of
non-isolated input signals for a
specified counter/frequency
module 7-58
(Continued on following page)