Advantech Data Acquisition Modules ADAM 4000 User Manual
Page 282
Chapter
7
7-47 ADAM 4000 Series User’s Manual
$AA6N
Name
Clear Counter command
Description
Clears the counter 0 or counter 1 of the specified
counter/frequency module.
Syntax
$AA6N(cr)
$
is a delimiter character.
AA
(range 00-FF) represents the 2-character hexadecimal
address that you will access to.
6
is the Clear Counter command.
N
determines the counter which should be cleared.
N = 0 represents counter 0
N = 1 represents counter 1
(cr)
is the terminating character, carriage return (0Dh).
Response
!AA(cr)
if the command is valid.
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
!
is a delimiter character which indicates a valid command.
AA
(range 00-FF) represents the 2-character hexadecimal
address of the module.
(cr)
is the terminating character, carriage return (0Dh).
Example command:
$1361(cr)
response: !13(cr)
The command requests the counter/frequency module at
address 13 to clear counter 1. The module replies with its
address indicating that the counter has been cleared.
4080, 4080D