Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 118)

Chapter
4
Chapter 4 Command Set 4-15
ADAM-4017+ Command Table
Command
Syntax Command Name Command Description Page
No.
%AANNTTCCFF Configuration Set the address, input range, baud rate,
data format, checksum status and/or
integration time for the specified analog
input module 5-4
$AA2 Configuration
Status
Return the configuration parameters for
the specified analog input module 5-10
$AAF Read Version Return the firmware version code from the
specified analog input module 5-12
$AAM Read the Module
Name
Return the module name from the
specified analog input module 5-13
#AA Read Analog Input
from all Channels
Return the input values from all channels
of the specified analog input module 5-14
#AAN Read Analog Input
from Channel N
Return the input value from channels
number N of the specified analog input
module 5-16
$AA5VV Enable/disable
Channels for
Multiplexing
Enables/disables multiplexing
simultaneously for seperate channels of
the specified input module 5-17
$AA6 Read Channel
Status
Ask the specified input module to return
the status of all eight channels 5-18
$AA0Ci Span Calibration Gain error calibrate of assignment channel,
User have to input the external standard source
for calibrating process 5-27
$AA1Ci Offset Calibration Offset error calibrate of assignment channel,
User have to input the external standard source
for calibrating process 5-28
$AA7CiRrr Input Range
Setting
Input range setting individually 5-29
$AA8Ci Read Input Range Get the input range of the assignment
channel
5-30
$AAXnnnn Watchdog Timer
Setting Set communication WDT cycle time from
0000 ~ 9999 (unit: 0.1 second. if value is
0000, the communication WDT function
will be disable) 5-31
$AAY
Read Watchdog
Timer Setting
Read the cycle time setting of
communication WDT
5-32