GE Industrial Solutions Pulsar Plus Controller - Manual (Page 138)

Pulsar Plus Controller Family
Issue 7 December 2011 138
Password: administrator
230 Logged in
3. Change directory (cd) to the web directory by typing: cd web.
ftp> cd custom
250 CWD command successful
4. Use the put command to copy the web pages to the controller.
ftp> put alt.lang
200 Port command okay
150 Opening data connection for STOR (192.168.2.1,1576)
5. Verify the transfer by a message displayed indicating a successful file transfer.
226 File sent OK
ftp: 917504 bytes sent in 2.31Seconds 396.50Kbytes/sec.
6. Type bye to exit the FTP session.
ftp> bye
221 Goodbye!
The software can also be uploaded through the web pages. Login into through the web pages as
“administrator” and go to the “Software” tab and use the “Upgrade Software” tab feature button located at
the bottom of the page. The sample screen is shown below.
Clicking the “Upgrade Software” button provides an interface to select which file is to be upgraded as well
as a tool to help select the location of the file to FTP. Following is a sample screen.
.