GE Industrial Solutions Record Plus TDR Door-Ring Interlock Kit: FC100 User Manual
Record plus, Molded case circuit breaker accessories, Product description
DEH40919 Installation Instructions
g
Record Plus™
Molded Case Circuit Breaker
Accessories
TDR Integral Handle Operator
Door-Ring Interlock Kit
Congratulations and thank you for choosing the
Record
Plus™
family of current-limiting circuit breakers. This
TDR Integral Handle Operator Door Ring Interlock
Catch Kit accessory is suitable for use with the FC100
circuit breaker series.
Record Plus™
circuit breakers are designed with a full
line of integrated accessories. All units use the latest in
integrated modular circuit breaker technology for
flexibility in application and maximizing the product’s
utilization and capabilities.
All
Record Plus™
circuit breakers are listed by
Underwriters Laboratories to the UL489 standard and the
CSA Standard C22.2, No. 5. These circuit breakers are
certified to IEC60947-2.
These accessories are also for use with our MAG-BREAK®
instantaneous trip-only circuit breakers, which meet the
same standards and are UL-recognized components for
use in motor applications. They can also be used with our
molded case switches, which are listed per Underwriters
Laboratories to the UL489 standard.
Record Plus™
circuit breakers and their accessories are
designed and manufactured to exceed our global
customers’ high standards for reliability and quality.
Warning: DANGER of Electrical shock or injury.
Ensure ALL electrical power supplies are OFF before
installing or removing any devices. The breaker, trip
unit, or accessories MUST ONLY be installed and
serviced by QUALIFIED personnel. See NEMA
publication AB4.
Avertissement: Danger contre les risques
d'électrocutions. S'assurer avant TOUTES
manipulations du disjoncteur que les différentes
sources d'alimentation sont en position OFF. Les
disjoncteurs, unités de protection, ou accessoires
doivent être installés par des personnes qualifiées et
habilitées. Lira NEMA publication AB4.
Figure 1. TDR integral handle operator kit.
CAUTION:
This product is NOT suitable for use in
equipment not specifically design to accept it. Contact the
equipment manufacturer for possible equipment
modifications.
ATTENTION:
Cet appareil nedoit pas etre employe dans
un equipement non specialement adapte a cet effet.
Contactez le constructeur concernant les possibles
modifications a apporter a l'equipement.
Product Description
This accessory is for use with
Record Plus™
FC100 TDR
integral handle operators catalog numbers FCNRC and
FCNRD. The purpose of the catch kit is to prevent an
enclosure door from being opened while a circuit breaker
is ON. There is an interlock defeat screw located on the
round indicator plate of the interlock mechanism.
The parts supplied with this kit are listed in Table 1. The
parts are illustrated in numbers in brackets in the text and