GE Industrial Solutions Record Plus TDR, NEMA 1, 12: FE250 - Manual

DEH41028 Installation Instructions
g
Record Plus ™
Molded Case Circuit Breaker
Accessories
DEH41028
Integral Handle Operator, Type
TDR
Congratulations and thank you for choosing the
Record Plus™ family of current-limiting circuit
breakers. The integral handle TDR type operator is
listed under UL 489 and is suitable for use with the
FE250 circuit breaker series.
Record Plus™ circuit breakers are designed with a
full line of integrated accessories. All units use the
latest in integrated modular circuit breaker
technology for flexibility in application and
maximizing the product’s utilization and
capabilities.
All
Record Plus™ circuit breakers are listed by
Underwriters Laboratories to the UL489 standard.
Record Plus™ circuit breakers and their accessories
are designed and manufactured to exceed our global
customers’ high standards for reliability and quality.
WARNING : DANGER of electrical shock or
injury. Ensure that ALL electrical power supplies
are OFF before installing or removing any
devices. The breaker, trip unit, or accessories
MUST ONLY be installed and serviced by
QUALIFIED personnel. See NEMA publication
AB4.
AVERTISSEMENT: Danger contre les risques
d'électrocutions. S'assurer avant TOUTES
manipulations du disjoncteur que les différentes
sources d'alimentation sont en position OFF. Les
disjoncteurs, unités de protection, ou accessoires
doivent être installés par des personnes qualifiées
et habilitées. Lira NEMA publication AB4.
Figure1. TDR integral handle operator installed on a
Record Plus ™ FE250 circuit breaker
(vertical orientation shown).
FENRC
FENRCI
CAUTION: This product is NOT suitable for use
in equipment not specifically design to accept it.
Contact the equipment manufacturer for possible
equipment modifications.
ATTENTION: Cet appareil nedoit pas etre
employe dans un equipement non specialement
adapte a cet effet. Contactez le constructeur
concernant les possibles modifications