GE Industrial Solutions Austin Lynx II SIP - Manual

Data Sheet
October 2, 2009
Austin Lynx TM II SIP Non-isolated Power Modules:
2.4Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc Output;10A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-021 ver. 1.23
PDF name: lynx_II_sip_ds.pdf
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
ƒ Enterprise Networks
ƒ Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Flexible output voltage sequencing EZ-
SEQUENCE
TM
ƒ Delivers up to 10A output current
ƒ High efficiency – 95% at 3.3V full load (V
IN
= 5.0V)
ƒ Small size and low profile:
50.8 mm x 12.7 mm x 8.1 mm
ƒ (2.00 in x 0.50 in x 0.32 in)
ƒ Low output ripple and noise
ƒ High Reliability:
Calculated MTBF = 15.7M hours at 25 o C Full-load
ƒ Constant switching frequency (300 kHz)
ƒ Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
ƒ Line Regulation: 0.3% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4 % (typical)
ƒ Remote On/Off
ƒ Remote sense
ƒ Output overcurrent protection (non-latching)
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-
03 Certified, and VDE ‡ 0805:2001-12 (EN60950-1)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin Lynx TM II SIP power modules are non-isolated DC-DC converters that can deliver up to 10A of output current
with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage
programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage (V
IN
= 2.4 –
5.5Vdc). The Austin Lynx TM II series has a sequencing feature, EZ-SEQUENCE TM that enable designers to
implement various types of output voltage sequencing when powering multiple voltages on a board.
RoHS Compliant
EZ-SEQUENCE TM