GE Industrial Solutions Pulsar Plus Controller User Manual

Page 136

Pulsar Plus Controller Family

Issue 7 December 2011

136

6. Wait until the message indicating a successful file transfer is displayed.

226 File sent OK

ftp: 917504 bytes sent in 2.31Seconds 396.50Kbytes/sec.

7. Type bye to exit/logout of the FTP session.

ftp> bye

221 Goodbye!

Web Pages
Using any FTP client, perform the following steps to load default web pages:

1. Type: FTP x.x.x.x ( The controller Working IP Address is 192.168.2.1).

ftp 192.168.2.1
Connected to 192.168.2.1

220 NE843 FTP Ready

2. Login as guest using the using the network administrator password (administrator).

User (192.168.2.1:(none)): guest

331 User name okay, need password

Password: administrator

230 Logged in

3. Change directory (cd) to the web directory by typing: cd web.

ftp> cd web

250 CWD command successful

4. Use the put command to copy the web pages to the controller.

ftp> put NE843-pages.web

200 Port command okay
150 Opening data connection for STOR (192.168.2.1,1576)

5. Verify the transfer by a message displayed indicating a successful file transfer.