GE Industrial Solutions Record Plus Shunt Trip and Undervoltage Release User Manual
Record plus, Molded case circuit breaker accessories, Shunt trip and undervoltage release

DEH40363 Installation Instructions
g
Record Plus™
Molded Case Circuit Breaker
Accessories
Shunt Trip and Undervoltage
Release
Congratulations and thank you for choosing the
Record Plus™
family of current-limiting circuit
breakers. This UL-listed shunt trip or undervoltage
release is suitable for use with the FC100, FB100,
FE150, FE250, FG400, and FG600 circuit breaker
series.
Record Plus™
circuit breakers are designed with a
full line of integrated accessories. All units use the
latest in integrated modular circuit breaker
technology for flexibility in application and
maximizing the product’s utilization and
capabilities.
Record Plus™
circuit breakers are all listed by
Underwriters Laboratories to the UL489 standard
and may be listed to CSA Standard C22.2, No. 5
and IEC60947-2.
They can also be used with our molded case
switches, which are listed per Underwriters
Laboratories to the UL489 standard.
Record Plus™
circuit breakers and their accessories
are designed and manufactured to exceed our
global customers’ high standards for reliability and
quality.
WARNING
: DANGER of electrical shock or injury.
Ensure that ALL electrical power supplies are OFF
before installing or removing any devices. The
breaker, trip unit, or accessories MUST ONLY be
installed and serviced by QUALIFIED personnel. See
NEMA publication AB4.
AVERTISSEMENT: Danger contre les risques
d'électrocutions. S'assurer avant TOUTES
manipulations du disjoncteur que les différentes
sources d'alimentation sont en position OFF. Les
disjoncteurs, unités de protection, ou accessoires
doivent être installés par des personnes qualifiées et
habilitées. Lira NEMA publication AB4.
Figure 1. Shunt trip and undervoltage release accessories.
CAUTION: This product is NOT suitable for use in
equipment not specifically design to accept it.
Contact the equipment manufacturer for possible
equipment modifications.
ATTENTION: Cet appareil nedoit pas etre employe
dans un equipement non specialement adapte a cet
effet. Contactez le constructeur concernant les
possibles modifications a apporter a l'equipement.
Product Description
The shunt trip and undervoltage release (UVR) covered
by these instructions are illustrated in Figure 1. Catalog
numbers for the available configurations are listed in
Table 1, with voltage and current ratings.
Shunt Trip
Undervoltage
Release