GE Industrial Solutions CAR1612FP series - Manual

GE Energy Data Sheet
November 1, 2012 ©2012 General Electric Company. All rights reserved.
CAR1612FP series rectifier
Input: 85Vac to 264Vac; Output: 12Vdc @ 1600W; 3.3Vdc or 5 Vdc @ 1A
Features
 Universal input with PFC
 Constant power characteristic
 2 front panel LED 1-input
LED 2-[output, fault, over temp]
 Remote ON/OFF control of the 12Vdc output
 Remote sense on the 12Vdc output
 No minimum load requirements
 Redundant parallel operation
 Active load sharing (single wire)
 Hot Pluggable
 Efficiency: typically 94.5% @ 50% load
 Standby orderable either as 3.3Vdc or 5Vdc
 Auto recoverable OC & OT protection
 Digital status & control: I 2 C and PMBus serial bus
 EN/IEC/UL60950-1 2 nd edition; UL, CSA and VDE
 EMI: class B FCC docket 20780 part 15, EN55022
 Meets EN6100 immunity and transient standards
 Shock & vibration: NEBS GR-63-CORE, level 3
Applications

12Vdc distributed power architectures

Datacom applications

Mid to high-end Servers

Enterprise Networking

Network Attached Storage

Telecom Access Nodes

Routers/Switches

Broadband Switches

ATE Equipment
Description
The CAR1612FP series of Front-End rectifiers provide highly efficient isolated power from worldwide input mains in a
compact 1U industry standard form factor in an unprecedented power density of 19W/in 3 . These rectifiers are ideal
for datacom applications such as enterprise networking, mid to high-end servers, and storage equipment, where mid
to light load efficiency is of key importance given the nature of the power consumption of the end application.
The high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for future
growth. The industry standard PMBus compliant I 2 C communications buss offers a full range of control and
monitoring capabilities. The SMBAlert signal pin alerts customers automatically of any state change within the power
supply.