Rainbow Electronics GM862-QUAD-PY User Manual

Page 90

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

page 90 of 434

@CLCK - Facility Improved Lock/Unlock

SELINT 0 / 1

"AO"- BAOC (Barr All Outgoing Calls)
"OI" - BOIC (Barr Outgoing International Calls)
"OX" - BOIC-exHC (Barr Outgoing International Calls except to Home

Country)

"AI" - BAIC (Barr All Incoming Calls)
"IR" - BIC-Roam (Barr Incoming Calls when Roaming outside the home

country)

"AB" - All Barring services (applicable only for =0)
"AG" - All outGoing barring services (applicable only for =0)
"AC" - All inComing barring services (applicable only for =0)
"FD" - SIM fixed dialling memory feature (if PIN2 authentication has not

been done during the current session, PIN2 is required as
)

"PN" - network Personalisation
"PU" - network subset Personalisation

- defines the operation to be done on the facility
0 - unlock facility
1 - lock facility
2 - query status

- shall be the same as password specified for the facility from

the DTE user interface or with command Change Password
+CPWD

- sum of integers each representing a class of information (default

is 7)

1- voice (telephony)
2 - data (refers to all bearer services)
4 - fax (facsimile services)
8 - short message service
16 - data circuit sync
32 - data circuit async
64 - dedicated packet access
128 - dedicated PAD access

Note: when =2 and command successful, it returns:
@CLCK: [,
[@CLCK: ,[…]]

where
- the current status of the facility
0 - not active
1 - active
n> - class of information of the facility

AT@CLCK=?

Test command reports all the facilities supported by the device.

Reference GSM

07.07