Rainbow Electronics GM862-QUAD-PY - Manual (Page 383)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 383 of 434
#CSURVC - Network Survey (Numeric Format) SELINT 0 / 1
1 - pbcch activated on the cell
> - network operation mode
1
2
3
> - routing area code
0..255 -
> - SPLIT_PG_CYCLE support
..0 - SPLIT_PG_CYCLE is not supported on CCCH on this cell
..1 - SPLIT_PG_CYCLE is supported on CCCH on this cell
- priority access threshold
0 -
3..6 -
- network control order
0..2 -
- timer 3168
- timer 3192
- discontinuous reception max time (in seconds)
- packed control ack
- blocked sequenc countdown max value
- alpha parameter for power control
- type of channel which shall be used for downlink
measurements for power control
0 - BCCH
1 - PDCH
(For non BCCH-Carrier)
,
where:
- RF channel
- receiption level (in dBm)
The output ends with the string:
Network survey ended
AT#CSURVC?
AT*CSURVC? Read command has the same behaviour as the Execution command with
parameters omitted
Example AT#CSURVC
Network survey started…
48,24,-52,0.00,610,1,33281,3648,0,2,30 48,5,14 19 22 48
82