Rainbow Electronics GM862-QUAD-PY - Manual (Page 172)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 172 of 434
+CPMS - Preferred Message Storage SELINT 2
[,]] Parameters:
- memory from which messages are read and deleted
"SM" - SIM SMS memory storage
"ME" - ME internal storage (read only, no delete)
- memory to which writing and sending operations are made
"SM" - SIM SMS memory storage
- memory to which received SMs are preferred to be stored
"SM" - SIM SMS memory storage
The command returns the memory storage status in the format:
+CPMS: ,,,,,
where:
- number of SMs stored into
- max number of SMs that can contain
- number of SMs stored into
max number of SMs that can contain
- number of SMs stored into
- max number of SMs that can contain
Note: The only supported memory storage for writing and sending
SMs is the SIM internal memory "SM", so =="SM".
Note: the received class 0 SMS are stored in the "ME" memory
regardless the setting and they are automatically deleted at
power off.
AT+CPMS? Read command reports the message storage status in the format:
+CPMS: ,,,,,,
,,
where , and are the selected storage
memories for reading, writing and storing respectively.
AT+CPMS=? Test command reports the supported values for parameters ,
and
Example AT+CPMS?
+CPMS: "SM",5,10,"SM",5,10,"SM",5,10
OK
(you have 5 out of 10 SMS SIM positions occupied)
S
M
O
D
E
=
0
#
S
M
S
M
O
D
E
=
0
#
S
M
S
M
O
D
E
=
0
#
S
M
S
M
Reference GSM 07.05
(#SMSMODE=1)
#
S
AT+CPMS=
Set command selects memory storages , and
to be used for reading, writing, sending and storing SMs.