Rainbow Electronics GM862-QUAD-PY - Manual (Page 130)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 130 of 434
+CPBW - Write Phonebook Entry SELINT 0 / 1
- the text associated to the number, string type; used character set
should be the one selected with command +CSCS.
Note: If record number already exists, it will be overwritten.
Note: if only is given, the record number is deleted.
Note: if is omitted or =0, the number is stored
in the first free phonebook location.
(example at+cpbw=0,2,129,"Testo" and at+cpbw=,2,129,"Testo")
Note: omission of all the subparameters causes an ERROR result code.
AT+CPBW=? Test command returns location range supported by the current storage as
a compound value, the maximum length of field, supported
number format of the storage and maximum length of field. The
format is:
+CPBW: (list of supported s),,
(list of supported s),
where:
- integer type value indicating the maximum length of field
- integer type value indicating the maximum length of field
Reference GSM 07.07
Note Remember to select the PB storage with +CPBS command before issuing
PB commands.
+CPBW - Write Phonebook Entry
SELINT 2
AT+CPBW=
[]
[,
[,
[,]]] Execution command writes phonebook entry in location number in
the current phonebook memory storage selected with +CPBS.
Parameters:
- integer type, value in the range of location numbers of the
currently selected phonebook memory storage (see +CPBS).
- string type, phone number in the format
- the type of number
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
- the text associated to the number, string type; used character set
should be the one selected with command +CSCS.
Note: If record number already exists, it will be overwritten.