Rainbow Electronics GM862-QUAD-PY - Manual (Page 396)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 396 of 434
#STIA - SIM Tookit Interface Activation SELINT 2
1 - File Change Notification;
2 - SIM Initialization and File Change Notification;
3 - SIM Initialization;
4 - SIM Reset
In this case neither #STGI nor #STSR commands are required:
• AT#STGI is accepted anyway.
• AT#STSR=,0 will answer OK but do nothing.
if =17 (SEND SS)
if =19 (SEND SHORT MESSAGE)
if =20 (SEND DTMF)
if =32 (PLAY TONE)
an unsolicited notification will be sent if allowed by SIM (see GSM
11.14):
#STN: [,]
where:
- (optional) text to be displayed to user
In these cases neither #STGI nor #STSR commands are
required:
• AT#STGI is accepted anyway.
• AT#STSR=,0 will answer OK but do nothing.
In case of SEND SHORT MESSAGE (=19) command if
sending to network fails an unsolicited notification will be sent
#STN: 119
if =33 (DISPLAY TEXT)
an unsolicited notification will be sent if allowed by SIM (see GSM
11.14):
#STN: ,[,]
where:
- unsigned Integer used as a bit field.
0..255 - used as a bit field:
bit 1:
0 - normal priority
1 - high priority