Rainbow Electronics GM862-QUAD-PY - Manual (Page 401)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 401 of 434
#STGI - SIM Tookit Get Information SELINT 2
- unsigned Integer used as a bit field.
0..255 - used as a bit field:
bit 1:
0 - normal priority
1 - high priority
bits 2 to 7: reserved for future use
bit 8:
0 - clear message after a delay
1 - wait for user to clear message
- text to be displayed to user
if =34 (GET INKEY)
#STGI: ,,
where:
- unsigned Integer used as a bit field.
0..255 - used as a bit field:
bit 1:
0 - Digits only (0-9, *, # and +)
1 - Alphabet set;
bit 2:
0 - SMS default alphabet (GSM character set)
1 - UCS2 alphabet
bit 3:
0 - Character sets defined by bit 1 and bit 2 are enabled
1 - Character sets defined by bit 1 and bit 2 are disabled and the
"Yes/No" response is requested
bits 4 to 7:
0
bit 8:
0 - No help information available
1 - Help information available
- String as prompt for text.
if =35 (GET INPUT)
#STGI: ,,,,
[,]
where:
- unsigned Integer used as a bit field.
0..255 - used as a bit field:
bit 1:
0 - Digits only (0-9, *, #, and +)