Rainbow Electronics GM862-QUAD-PY - Manual (Page 208)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 208 of 434
+CMGR - Read Message SELINT 2
M
O
D
E
=
0
#
S
M
S
M
O
D
E
=
0
#
S
M
S
M
O
D
E
=
0
#
S
M
S
M
O
D
E
=
0
- status of the message
0 - new message
1 - read message
2 - stored message not yet sent
3 - stored message already sent
- string type alphanumeric representation of or ,
corresponding to an entry found in the phonebook; used
character set is the one selected with command +CSCS.
- length of the PDU in bytes.
- message in PDU format according to GSM 3.40.
The status of the message and entire message data unit is
returned.
(Text Mode)
If there is a Received message in location the output
format is (the information written in italics will be present depending
on +CSDH last setting):
+CMGR: ,,,[,,,,
,,,]
If there is either a Sent or an Unsent message in location
the output format is:
+CMGR: ,,[,,,,,,
,,]
If there is a Message Delivery Confirm in location the
output format is:
+CMGR: ,,,,,,
- message reference number; GSM 03.40 TP-Message-
Reference in integer format
- arrival time of the message to the SC
selected character set (see +CSCS)