Rainbow Electronics GM862-QUAD-PY - Manual (Page 186)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 186 of 434
+CNMI - New Message Indications To Terminal Equipment SELINT 0 / 1
- PDU length
- PDU message
(TEXT Mode)
+CMT:,,[,,,,,
,,] (the information written in
italics will be present depending on +CSDH last setting)
where:
- originating address, string type converted in the currently
selected character set (see +CSCS)
- arrival time of the message to the SC
, - type of number or :
129 - number in national format
145 - number in international format (contains the "+")
- first octet of GSM 03.40
- Protocol Identifier
- Data Coding Scheme
- Service Centre address, string type, converted in the
currently selected character set (see +CSCS)
- text length
- TP-User-Data
Class 2 messages and messages in the message waiting indication
group (stored message) result in indication as defined in =1.
3 - Class 3 SMS-DELIVERs are routed directly to TE using unsolicited
result codes defined in =2. Messages of other data coding
schemes result in indication as defined in =1.
- broadcast reporting option
0 - Cell Broadcast Messages are not sent to the DTE
2 - New Cell Broadcast Messages are sent to the DTE with the unsolicited
result code:
(PDU Mode)
+CBM:
where:
- PDU length
- message PDU
(TEXT Mode)
+CBM:,,,,
where:
- message serial number
- message ID
- Data Coding Scheme
- page number
- total number of pages of the message