Rainbow Electronics GM862-QUAD-PY - Manual (Page 400)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 400 of 434
#STGI - SIM Tookit Get Information SELINT 2
if =1 (REFRESH)
#STGI: ,
where:
0 - SIM Initialization and Full File Change Notification;
1 - File Change Notification;
2 - SIM Initialization and File Change Notification;
3 - SIM Initialization;
4 - SIM Reset
if =16 (SET UP CALL)
#STGI: ,,[],
where:
- unsigned integer, used as an enumeration
0 Set up call, but only if not currently busy on another call
1 Set up call, but only if not currently busy on another call, with redial
2 Set up call, putting all other calls (if any) on hold
3 Set up call, putting all other calls (if any) on hold, with redial
4 Set up call, disconnecting all other calls (if any)
5 Set up call, disconnecting all other calls (if any), with redial
- string for user confirmation stage
- string containing called number
if =17 (SEND SS)
if =18 (SEND USSD)
if =19 (SEND SHORT MESSAGE)
if =20 (SEND DTMF)
if =32 (PLAY TONE)
#STGI: [,]
where:
- text to be displayed to user
if =33 (DISPLAY TEXT)
#STGI: ,[,]
where: