Rainbow Electronics GM862-QUAD-PY User Manual
Page 361

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 361 of 434
#GDATAVOL - GPRS Data Volume
SELINT 2
AT#GDATAVOL=
[
Execution command reports, for every active PDP context, the amount of
data the last GPRS session (and the last GSM session, if GSM context is
active) received and transmitted, or it will report the total amount of data
received and transmitted during all past GPRS (and GSM) sessions, since
last reset.
Parameter:
(1-5) and GSM data counter for GSM context 0
1 - it reports the last GPRS session data counter for the all the set PDP
contexts (i.e. all the PDP contexts with APN parameter set using
+CGDCONT) (and the last GSM session data counter for the GSM
context, if set through #GSMCONT), in the format:
#GDATAVOL:
#GDATAVOL:
where:
0 - specifies the GSM context
1..5 - numeric parameter which specifies a particular PDP context
definition
(or GSM) session for
session for
session for
2 - it reports the total GPRS data counter, since last reset, for the all the
set PDP contexts (i.e. all the PDP context with APN parameter set using
+CGDCONT) and the total GSM data counter for the GSM context, if set
through #GSMCONT, in the format:
#GDATAVOL:
#GDATAVOL:
where:
0 - specifies the GSM context
1..5 - numeric parameter which specifies a particular PDP context
definition
(or GSM) session since last reset, for
session since last reset, for