Rainbow Electronics GM862-QUAD-PY - Manual (Page 122)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 122 of 434
+CIND - Indicator Control SELINT 2
URC) automatically sent by the ME to the application, whenever the
value of the associated indicator changes; the value can be directly
queried with +CIND?
1 - the indicator is registered: an unsolicited result code (+CIEV URC) is
automatically sent by the ME to the application, whenever the value of
the associated indicator changes; it is still possible to query the value
through +CIND? (default)
AT+CIND? Read command returns the current value of ME indicators, in the format:
+CIND: [,[,…]]
16
Note: the order of the values s is the same as that in which the
associated indicators appear from test command AT+CIND=?
AT+CIND=? Test command returns pairs, where string value is a description
(max. 16 chars) of the indicator and compound value is the supported
values for the indicator, in the format:
+CIND: ((, (list of supported s))[,(, (list of
supported s))[,…]])
where:
- indicator names as follows (along with their ranges)
“battchg” - battery charge level
- battery charge level indicator range
0..5
99 - not measurable
“signal” - signal quality
- signal quality indicator range
0..7
99 - not measurable
“service” - service availability
- service availability indicator range
0 - not registered to any network
1 - registered
“sounder” - sounder activity
- sounder activity indicator range
0 - there’s no any sound activity
1 - there’s some sound activity
“message” - message received
- message received indicator range
0 - there is no unread short message at memory location “SM”
1 - unread short message at memory location “SM”
“call” - call in progress
- call in progress indicator range
0 - there’s no calls in progress
1 - at least a call has been established
“roam” - roaming
16 In present SW release AT+CIND? does not return current value in case of SmsFull, UnreadMessage and
SoundActivity also only Rssi and Roam URC indicators are implemented. All other indicators will be fully
implemented in the future SW releases.