5 save settings - +csas – Rainbow Electronics GM862-QUAD-PY User Manual

Page 183

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

page 183 of 434

CSCB -Select Cell Broadcast Message Types

SELINT 2

Note: the current settings are stored through +CSAS

AT+CSCB?

Read command reports the current value of parameters ,
and .

AT+CSCB=?

Test command returns the range of values for parameter .

Example

AT+CSCB?
+CSCB: 1,"",""

(all CBMs are accepted, none is rejected)

AT+CSCB=0,"0,1,300-315,450","0-3"
OK

Reference

GSM 07.05, GSM 03.41, GSM 03.38.

3.5.5.2.5 Save Settings - +CSAS

+CSAS - Save Settings

SELINT 0 / 1

AT+CSAS
[=]

Execution command saves settings which have been made by the +CSCA,
+CSMP and +CSCB commands in local non volatile memory.

Parameter:

0 - it saves the settings to NVM (factory default).
1..n - SIM profile number; the value of n depends on the SIM and its max

is 3.

Note: certain settings may not be supported by the SIM and therefore they
are always saved to NVM, regardless the value of .

Note: If parameter is omitted the settings are saved in the non volatile
memory.

AT+CSAS?

Read command has the same effect as Execution command with parameter
omitted.

AT+CSAS=?

Test command returns the possible range of values for the parameter
.

Reference GSM

07.05

+CSAS - Save Settings

SELINT 2

AT+CSAS
[=]

is 3.

Note: certain settings may not be supported by the SIM and therefore they