Rainbow Electronics GM862-QUAD-PY - Manual (Page 177)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 177 of 434
+CSMP - Set Text Mode Parameters SELINT 2
=
0
#
S
M
S
M
O
D
E
=
0
#
S
M
S
M
O
D
E
=
0
#
S
M
S
M
O
D
E
=
0
#
S
M
bit[7]bit[6]bit[5]bit[4]bit[3]bit[2]bit[1]bit[0]):
bit[1]bit[0]: Message Type Indicator, 2-bit field describing the
message type: all the combinations are converted in [01]
(default is [01]);
[00] - converted in [01]
[01] - SMS-SUBMIT
[10] - converted in [01]
[11] - converted in [01]
bit[2]: Reject Duplicates, 1-bit field: user is not responsible for
setting this bit and, if any set, it will have no meaning (default
is [0]);
bit[4]bit[3]: Validity Period Format, 2-bit field indicating whether
or not the Validity Period field is present (default is [10]):
[00] - Validity Period field not present
[01] - Validity Period field present in enhanced format: it is
currently converted in [00], i.e. not present
[10] - Validity Period field present in relative format, (i.e. integer
type, see below)
[11] - Validity Period field present in absolute format (i.e. quoted
time-string type); we strongly suggest to not use this format
because its implementation is currently under refinement
bit[5]: Reply Path, 1-bit field indicating the request for Reply Path
(default is [0]);
[0] - Reply Path not requested
[1] - Reply Path requested
bit[6]: User Data Header Indicator, 1-bit field: user is not
responsible for setting this bit and, if any set, it will have no
meaning (default is [0]);
bit[7]: Status Report Request, 1-bit field indicating the MS is
requesting a status report (default is [0]);
[0] - MS is not requesting a status report
[1] - MS is requesting a status report
- depending on setting: if asks for a Validity Period in
relative format shall be integer type (default 167, i.e. 24
hours); if asks for a Validity Period in absolute format we
strongly suggest to modify it in relative format, because the
implementation of this topic is currently under refinement and it
is currently not possible to set with a quoted time string
type.
(for relative format only:)
0..143 - ( + 1) x 5 minutes;
144..167 - 12 hours + (( - 143) x 30 minutes);
168..196 - ( - 166) x 1 day;
197..255 - ( - 192) x 1 week;
- GSM 03.40 TP-Protocol-Identifier in integer format.
- depending on the command or result code: GSM 03.38 SMS