Rainbow Electronics GM862-QUAD-PY - Manual (Page 21)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 21 of 434
+FCLASS +ILRR +DR
+CSCS +CR +CRLP
+CRC +CSNS +CVHU
+CREG +CLIP +CLIR
+CCWA +CUSD +CAOC
+CSSN +CIND +CMER
+CPBS +CMEE +CGREG
+CGEREP +CMGF +CSDH
+CNMI #QSS #ACAL
5
#TEMPMON 6 #ACALEXT #ECAM
#SMOV #MWI #NITZ
#SKIPESC #E2ESC #STIA
$GPSNMUN
The values set by following commands are stored in the profile extended section and they don’t
depend on the specific CMUX instance (see +CMUX):
+CALM +CRSL +CMUT
5
+CLVL 5 +VTD +CSCB 7
#CAP 5 #SRS 5 #SRP 5
#STM 5 #DVI #E2SMSRI
#DAC #CODEC #SHFEC 5
#HFMICG 5 #HSMICG #SHFSD 5
#SPKMUT #NITZ #E2SLRI
#SIMDET #TEMPMON 6 #PSEL
#HFRECG #HSRECG #SHFAGC
#SHSAGC #SHSEC #SHSNR
#SHFNR #SHSSD #TSVOL
#CPUMODE
The values set by following commands are automatically stored in NVM, without issuing any storing
command and independently from the profile (unique values), and are automatically restored at
startup:
#SELINT
+COPS 8 +CGCLASS
+CGDCONT +CGQMIN +CGQREQ
#REGMODE #PLMNODE #COPSMODE
#DIALMODE #BND
#AUTOBND
#ENS #SCFG
#ENHSIM #AUTOATT #TXMONMODE
#TTY #ICMP #GSMCONT
#NWSCANTMR #SMSMODE #DNS
#TCPMAXDAT #TCPREASS
The values set by following commands are stored in NVM on demand, issuing specific commands
and independently from the profile:
+CSCA +CSMP +CSCB
stored by +CSAS
9 command and restored by +CRES 9 command
5 If #SELINT=2 they depend on the CMUX 0 instance only
6 It is partially stored in NVM, moreover only a part of it can depend on the specific CMUX instance; see
command description.
7 +CSCB is still stored in the profile extended section only for backward compatibility issues: its actual storing
and restoring are accomplished issuing +CSAS and +CRES
8 It is partially stored in NVM; see command description.
9 Both commands +CSAS (see §3.x.3.2.5) and +CRES (see §3.x.3.2.6) deal with non-volatile memory, intending
for it either the NVM and the SIM storage.