Toshiba e-STUDIO 170F - Manual (Page 99)

97
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Even if the Memory Transmis-
sion Mode is selected as the
default, you may desire to
transmit a specific document
directly from the Automatic
Document Feeder.
This is useful when the docu-
ment consists of many pages
or when the residual memory is
too small to store the docu-
ment data.
Select the desired function key
on the operation panel.
Press:
DIRECT SEND
Select “1. YES” by pressing: Dial the facsimile number of
the remote party using any of
the four dialing methods.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92
Direct Transmission - continued
Load the Document 1 Select YES 3 Dial the Facsimile
Number 4
Temporary Direct Transmission
Change the
Transmission Mode 2
JAN-31 09:43 AM 100%
AUTO RECEIVE
2.NO
DIRECT TX
1.YES JAN-31 09:43 AM 100%
ENTER TEL NUMBER