Toshiba e-STUDIO 170F - Manual (Page 53)

51 51
After completing this Configura-
tion Setting, press
STOP
to exit the Configuration Setting
mode and return to the Standby
Mode.
Power Saver Operation - continued
Enable or Disable the Printer
Power Saver function.
(to set Printer Power Saver ON)
(to set Printer Power Saver OFF)
If “ON” is selected, the cur-
rently set time period is dis-
played below. The time on the
left is the Printer Power Saver
start time (or time that the
printer unit will power down).
The time on the right is the
Printer Power Saver end time.
Select Another
SETUP Item, or ... 7
(Example if the 12-hour format
option is selected in DATE &
TIME setting)
When “OFF” is selected, the
“COMPLETED” message is
displayed as shown at the bot-
tom in Step 6. Returns to SET-
UP menu screen.
Select the Printer Power Saver Function 5
Move the cursor to the desired
position, using the following
keys.
or
Enter the time period.
Change the AM/PM designa-
tion if selected by pressing the
following keys.
or
MENU
When the correct time period is
displayed, press:
Displayed for 2 seconds
Enter the Start Time
and End Time 6
(Example if the 24-hour format
option is selected in DATE &
TIME setting)
Enter the time period (in min-
utes) for standby operation
prior to entering the Super En-
ergy Saver mode.
When the correct time period is
displayed, press:
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
Go to Step 7.
Enter the Start Time
Period 4
Returns to display the setup
menu screen.
ENTER TIME
(1-60) [ 3]
COMPLETED
START/STOP TIME
[00:00-00:00]
START/STOP TIME
[12:00AM-12:00AM]
COMPLETED