Toshiba e-STUDIO 170F - Manual (Page 220)

218
USER TEST MODE - AUTOMATIC TEST MODE
AUTO TEST
Display the TEST
MODE Menu 1
AUTO TEST mode permits you to automatically perform a series
of machine tests in one operation.
The test items performed by the AUTO TEST are:
• FLASH ROM TEST
Checks the program data, function data, and language data.
• SRAM TEST
Checks the SRAM Memory.
• DRAM TEST
Checks the DRAM Memory.
• MODEM TEST
Checks the modem and checks for phone line current.
• SCANNER TEST
Checks the image scanner.
• CODEC TEST
Checks the CODEC IC.
• PRINTER TEST
Checks the printer components for proper operation and prints
one test page.
• TONER IC TEST
Checks the TONER IC.
NOTE: AUTO TEST cannot be performed if data (such as re-
ceived data, delayed transmission, or polling data) is
stored in memory.
Press:
+
Select the AUTO
TEST Menu 2
Press:
Completed the
AUTO TEST 3
When all the tests end, the
word “OPERATION COM-
PLETED” is displayed on the
screen and a Test Pattern is
printed. After printing, the dis-
play returns to showing the
standby mode screen.
The results of the auto test can
be confirmed with the self test
report. To print the self test re-
port, refer to “PRINTING A
TEST RESULT” on page 230.
If the result of the auto test is
judged to be NG, call your ser-
vice representative.
MENU
To suspend the auto test,
press
STOP
.
The auto test starts, appears
on the screen indicating that
the test is under way.
3.TEST RESULT LIST
2.INDIVIDUAL TEST
TEST MODE
1.AUTO TEST
AUTO TEST
---------------
AUTO TEST
-------------------