Toshiba e-STUDIO 170F - Manual (Page 212)

210
If a document jam occurs dur-
ing a transmission, the mes-
sage “DOCUMENT JAM” is
displayed in the LCD window.
Follow this procedure to clear a
document jam.
Leave the power of the fac-
simile ON.
Remove other documents from
the Document Support, if any
(except the jammed portion). Open the Operation Panel. Remove the jammed docu-
ment. Check for pieces of pa-
per, clips, or staples which
may have caused the failure. Firmly close the Operation
Panel.
Confirm that the LCD display
indicates that the facsimile is
in the Standby Mode.
NOTE:
As for a document that has
jammed in the facsimile,
make a duplicate using a
copier and do the transmis-
sion over again with the new
duplicate used as the send-
ing document.
Clearing a Document Jam
Remove Other
Documents 1 Remove the
Jammed Document 3 Close the Operation
Panel 4 Open the Operation
Panel 2
Document