Toshiba e-STUDIO 170F - Manual (Page 229)

227
SENSOR TEST - continued
Completed the
SENSOR TEST 5
The result of the sensor test
can be confirmed with the self
test report. To print the self
test report, refer to “PRINTING
A TEST RESULT” on page
230.
If the result of the sensor test
is judged to be NG, call your
service representative.
Remove the Recording Paper
in the Recording Paper Tray.
When the absence of a Paper
is detected, the screen below
appears. After checking that
the screen is displayed, install
the Recording Paper in the Pa-
per Tray.
Detects the absence of
the Recording Paper.
If an Optional Recording Paper
Tray is installed, follow the
same test procedure for the
Optional Recording Paper Tray.
Install the Recording
Paper
SENSOR TEST
OK
SENSOR TEST
PUT IN PAPER
Detects the absence
of the Recording Paper
SENSOR TEST
PUT IN PAPER TRAY 2
SENSOR TEST
REMOVE PAPER TRAY 2
Install the Recording Paper
The result of the sensor test
(“OK” or “NG”) is displayed on
the screen, and the unit returns
to the individual test selection
screen.
Check the Paper Tray 4