Toshiba e-STUDIO 170F - Manual (Page 19)

17
Make sure that the Power Switch is turned OFF.
Plug in the power cord as in the figure below.
WARNING
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
• Use caution when installing or modifying the telephone lines.
• Avoid using a telephone (other than a cordless type) during an electric storm. There may be a remote risk of electric shock
from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
- FACSIMILE MACHINE INSTALLATION
Connect the telephone line cord (modular cord) to the “LINE” connector.
Connect the external telephone set (if desired) to the “TEL” connector.
Power Cord
Power Switch
OFF
Connecting Your TOSHIBA Facsimile