Toshiba e-STUDIO 170F - Manual (Page 80)

78
To delete the existing Group,
press:
(to DELETE)
To change the existing Group,
press:
(to MODIFY)
To retain the existing Group,
press:
(to RETAIN)
Return to Step 3 to select a
different Group Dial Number or
press
STOP
to return to the
Standby Mode.
Enter the Group Name (with up
to 20 characters) associated
with the Group Number.
See page 36 for more informa-
tion on Character Entry.
(When no name is entered in
this step, no name will be given
to the Group Number.)
When the name is displayed
correctly on the LCD display,
press:
Group Number Registration - continued
Enter the Group
Name 5 Retain the Existing
Group 4c Cancel the Existing
Group 4a Modify the Existing
Group 4b Enter a Remote
Station 6
Enter the addresses of the re-
mote stations to be preset in
the group.
If a remote station is assigned
to a One Touch key, press the
One Touch key.
If a remote station is assigned
to an Abbreviated Dial Num-
ber, enter the number then
press .
Example:
Abbreviated Dial Number
118 (preset as DENVER
OFFICE):
+
+
+
Then press:
Return to Step 3.
The current Group Name is dis-
played.
Go to Step 5.
After 2 seconds:
GROUP NUMBER 0001
ARE YOU SURE ?
NAME
[COLORADO GRP]
ENTER ABB. NUMBER
OR ONE TOUCH
GROUP NUMBER 0001
ABB. NUMBER 118
PRESS OT OR ABB.
OR ENTER